The premiere resin for:
-
Filleting
-
Laminating
-
Gluing
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs.
F.L.A.G. Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required. F.L.A.G. is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. This keeps fillets and fairing from slumping. F.L.A.G. Resin is next day sandable when cured at 60 degrees F. and higher with Medium Hardener. F.L.A.G. Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.
ShipShapeTV - how to make gorgeous fillets and smooth fairings with MAS epoxies
| Measured Properties |
Impirical Calculations or Physical Properties |
| Resin Viscosity |
3000-3400 cps |
Hardness |
Please Call Factory For More Information. |
| Color |
1 Gardener Max |
Tensile Strength |
| EEW |
190-200 |
Tensile Elogation |
| Tg |
140oF |
Compressive Strength |
| Mix Ratio |
2:1 Resin:Hardener |
|
| Peak Exotherm (30g batch) |
360oF |
| Pot Life (30g batch) |
15 minutes |
Physical properties are subject to change based on formula updates. Please contact factory for more information.
We highly recommend this product for your filleting and fairing applications.
